Industrial & machinery
Long-life control parts, connectors and precision metal components with lot traceability.
Jump to industryConsumer & smart devices
Retail-ready chargers, cables, displays and wireless modules that follow the launch calendar.
Jump to industryBuilding & electrical
Drivers, power supplies, enclosures and installation hardware with certification on file.
Jump to industryAutomotive & EV
Harnesses, automotive-grade ICs and machined parts tested for vibration and salt spray.
Jump to industryEnergy & lighting
Power supplies and extruded aluminium for luminaires and power products.
Jump to industryRetail & private label
Your brand on a proven platform, with packaging, pilot runs and fulfilment support.
Jump to industryOne supply chain, six sets of requirements
Vemlora is not a specialist in a single product family. We source, qualify, consolidate and document electronics and hardware across several industries, and we adjust the specification, the inspection plan and the shipping pattern to what each industry actually needs.
Specification discipline
Every order begins with a frozen part list: material, grade, tolerance, finish, packaging and the approved maker. Nothing is substituted without written agreement.
Compliance by market
Compliance is matched to the destination, not to the factory's own certificate. RoHS, REACH, CE, UKCA, FCC, ENEC and UL documentation is collected per order.
Volume that fits the demand
Pilot runs, scheduled releases, buffer stock and container programmes are all available from the same supplier, so the model can change as your demand does.
Industrial automation & machinery
What the customer needs
- Long-life parts with locked specifications, because a machine sold in 2024 must still be serviceable in 2034.
- Component-level traceability and lot control, so a failure can be traced back to a production batch.
- A supplier that can keep a hard-to-find connector or relay available after the original maker discontinues it.
What Vemlora supplies
- Control and driver boards assembled to your schematic or ours, with functional test and burn-in records.
- Connectors, relays, switches and protection devices in industrial temperature grades.
- Precision machined, stamped and sheet metal parts for machine frames, brackets and operator panels.
- HMI operator panels and sensor nodes for machine-level monitoring and retrofit projects.
| Quality and compliance | RoHS 3 and REACH declarations with every shipment; EN 60204-1 and IEC 61010 alignment for control assemblies; EMC pre-scan reports for boards carrying a CE mark; PPAP or first-article reports on request. |
|---|---|
| Usual order profile | MOQ 200 – 500 pcs per board or machined part; 12 – 22 days production; sea FCL or LCL for volume, air express when a machine is waiting on a part. |
MCU Control & Driver Boards Wire-to-Board Connectors Relays, Switches & Protection Devices HMI Touch Operator Panels CNC Machined Precision Parts
Consumer electronics & smart devices
What the customer needs
- Retail-ready product at a price the channel will accept, without compromising safety compliance.
- Short development cycles for accessories that follow each new phone, tablet or wearable launch.
- Packaging, artwork and carton marking that arrive ready for retail shelves and online fulfilment.
What Vemlora supplies
- GaN chargers and power adapters from 30 W to 140 W with interchangeable EU, UK, US and AU plugs.
- Cable assemblies and wire harnesses with custom lengths, colours, connectors and over-moulding.
- IoT sensor modules and wireless nodes for smart home, metering and monitoring products.
- TFT and touch display panels for handheld devices, wearables and small appliances.
| Quality and compliance | IEC/EN 62368-1 safety testing coordinated at an accredited laboratory; CE and UKCA technical files; FCC Part 15 support for North America; RoHS 3, REACH and, where needed, California Prop 65 statements. |
|---|---|
| Usual order profile | MOQ 1,000 – 3,000 pcs per model; 10 – 20 days production after sample approval; air or express for launch quantities, sea LCL once the product is established. |
Building automation & electrical installation
What the customer needs
- Consistent supply of standard installation components alongside a small number of custom parts.
- Certification evidence that satisfies electrical inspectors, installers and facility managers.
- Predictable replenishment, because a stalled installation site costs far more than the parts themselves.
What Vemlora supplies
- DIN rail and enclosed power supplies, relays and cable management.
- Relays, contactors, switches, fuses and surge protection devices for panel builders.
- Sheet metal enclosures, chassis and cabinets finished to RAL colours with silk-screen labelling.
- Cable management, glands, ties, heat-shrink and wire accessories for installation contractors.
| Quality and compliance | CE and RoHS declarations; ENEC or UL listed options on power products; IP54 – IP66 sealing verified by test report on enclosures; 100 % dielectric and function test on panel assemblies. |
|---|---|
| Usual order profile | MOQ 300 – 2,000 pcs per line; 10 – 22 days production; consolidated sea LCL shipments with scheduled monthly releases for installers. |
Relays, Switches & Protection Devices Cable Management & Wire Accessories Aluminium Extrusion Profiles
Automotive aftermarket & EV accessories
What the customer needs
- Parts that survive vibration, heat cycling and salt spray in real vehicle service.
- A supplier able to handle a wide reference range in modest quantities per reference.
- Batch-tested evidence of incoming cable and connector quality before assembly.
What Vemlora supplies
- Cable assemblies and harnesses with M8/M12, Deutsch, JST and Molex connectors.
- SMD integrated circuits with an AEC-Q100 automotive-grade option for control modules.
- CNC machined brackets, spacers and heat sinks in aluminium and stainless steel.
- Fasteners in A2-70, A4-80 and property class 10.9 / 12.9 with Dacromet or zinc-nickel plating.
| Quality and compliance | IATF 16949 aligned process at partner factories; PPAP level 3 on request; 100 % continuity and Hi-pot testing on harnesses; salt-spray and thermal cycling reports per batch; IMDS and REACH SVHC data for automotive submissions. |
|---|---|
| Usual order profile | MOQ 500 – 2,000 sets per reference; 12 – 20 days production; sea FCL for programme stock, air for first-fit and warranty emergencies. |
Energy, LED lighting & power
What the customer needs
- Energy performance and safety certification for each destination market, not just one.
- Dimmable and protocol-compatible products that work inside existing control systems.
- Cost control on high-volume, low-unit-price items where freight per unit matters as much as ex-works price.
What Vemlora supplies
- Enclosed switch-mode power supplies and power distribution accessories.
- Triac, 0-10 V, DALI and PWM dimming options with 90 – 305 V AC wide-range input.
- Aluminium extrusion profiles for luminaire bodies, heat sinks and mounting channels.
- Valves, fittings and fluid hardware for solar thermal, cooling and battery thermal circuits.
| Quality and compliance | CE, RoHS, ENEC and UL options on drivers and supplies; ErP Lot 7 and DOE Level VI efficiency evidence; LM-80 data referenced from the LED maker where relevant; 100 % burn-in on power products. |
|---|---|
| Usual order profile | MOQ 500 – 2,000 pcs per model; 10 – 18 days production; sea FCL for annual programme quantities, Europe rail for mid-size replenishment. |
Aluminium Extrusion Profiles GaN Power Adapters & Chargers Passive Components & BOM Kitting Cable Management & Wire Accessories
Retail & e-commerce private label
What the customer needs
- Your brand on a product that already works, with a credible retail presentation.
- Small first runs to test demand before committing to container-scale volume.
- Fulfilment flexibility: bulk to your warehouse, or pick, pack and ship per order.
What Vemlora supplies
- Private-label versions of catalogue lines with custom colour, logo, cable length, plug set and output.
- Retail packaging, instruction sheets, barcodes and carton marking prepared locally.
- Mixed-model container loads that combine several SKUs into one order and one invoice.
- Short and long-term storage in Kwai Chung with re-labelling and B2C fulfilment.
| Quality and compliance | CE, UKCA, FCC and RoHS documentation as applicable; drop-test and carton compression test reports for retail packaging; barcode and artwork verification before mass printing; pre-shipment inspection to AQL 2.5. |
|---|---|
| Usual order profile | MOQ from 500 pcs per model for a pilot run; 12 – 20 days production plus 2 – 5 days consolidation; sea LCL or air express for launch, FCL for repeat volume. |
How the six industries compare side by side
Typical first-order quantities, compliance priorities and repeat patterns. Values are representative of typical orders and are confirmed in a written quotation.
| Industry | Typical products | Key compliance | Typical first order | Repeat cycle |
|---|---|---|---|---|
| Industrial automation & machinery | Control boards, connectors, relays, HMI, machined and sheet metal parts | RoHS, REACH, EMC, EN 60204-1 alignment | About 25,000 units per year | Quarterly, with stocked service parts |
| Consumer electronics & smart devices | GaN chargers, cable assemblies, IoT modules, TFT displays | IEC/EN 62368-1, CE, UKCA, FCC, RoHS, REACH | About 20,000 units per year | Every 6 – 10 weeks, model driven |
| Building automation & electrical installation | Power supplies, relays, enclosures, cable management | CE, RoHS, ENEC or UL, IP54 – IP66 | About 18,000 units per year | Monthly release against a frame order |
| Automotive aftermarket & EV accessories | Harnesses, AEC-Q100 ICs, machined brackets, fasteners, stampings | IATF 16949 aligned, PPAP, IMDS, salt spray | About 30,000 units per year | Programme based, per vehicle platform |
| Energy, LED lighting & power | Power supplies, aluminium profiles, cable assemblies | CE, RoHS, ENEC, UL, ErP Lot 7, LM-80 data | Two to four containers per year | Two to four containers per year |
| Retail & e-commerce private label | Private-label chargers, cables, accessories, packaged SKUs | CE, UKCA, FCC, RoHS, packaging drop test | About 12,000 units per year | Seasonal, 4 – 8 weeks before peak |
Three anonymised examples of how this works in practice
Client names and trade marks are omitted. Figures are rounded and shown to illustrate the shape of the work, not as a forecast for any other project.
A European distributor consolidating six suppliers
The problem
A distributor of electrical installation products bought relays, enclosures and cable accessories from six different suppliers in Guangdong and Zhejiang. Each supplier shipped separately, each invoice carried its own freight minimum, and the distributor spent two days a month reconciling documents. Average landed cost was running roughly 9 % above the ex-works price.
Our approach
We moved all six supply lines under one Vemlora order. Suppliers were audited, specifications were frozen in a written part list, and every line was contracted through our Hong Kong entity. Goods were received in Kwai Chung, inspected line by line, re-packed into uniform export cartons and released as a single LCL shipment every six weeks against a rolling release schedule.
The outcome
Six suppliers became one contract, one invoice and one shipment. Freight and documentation cost fell by about 22 % per shipment, the average landed cost dropped roughly 7 %, and the distributor's own administrative workload fell from two days a month to roughly three hours. Stock-outs on the two fastest-moving references dropped to zero over the following year.
A machinery builder needing a discontinued connector
The problem
A machine builder in Southeast Asia was told by its original connector maker that a 3.96 mm pitch wire-to-board housing used on a control panel would be discontinued in two quarters. The machine was still in production and roughly 400 units a year were expected to ship for another five years. A redesign would have required re-testing and re-certifying the panel.
Our approach
We tooled a drop-in replacement housing and crimp contact to the original drawing. Electrical and mechanical characteristics were matched to the datasheet - pitch, current rating, insulator material and plating - and the customer approved samples against a golden reference on their own line. A last-time-buy of the original part covered the transition, and a 12-month buffer stock was held in Kwai Chung.
The outcome
The replacement was qualified in nine weeks at a fraction of the cost of a panel redesign, which had been estimated at several months of engineering time. The customer kept the machine in production without re-certification, and a stock of about 18 months of forecast usage removed any line-stop risk during the changeover.
A brand owner developing a private-label charger
The problem
An online brand owner wanted a 65 W dual-port charger under its own brand. The target retail position left limited room for landed cost on the product and its packaging. There was no in-house electronics engineering, no existing supplier and no confidence about which safety standard would be required for the EU and the UK.
Our approach
We started from an existing 65 W GaN platform rather than a clean-sheet design, so only the housing colour, logo, plug set and retail packaging were new. A design-for-manufacturing review reduced the enclosure to one moulded part, an EU and UK compliance plan was agreed in writing, and IEC/EN 62368-1 testing was booked with an accredited laboratory before tooling release.
The outcome
First samples were approved in five weeks and mass production started in week eleven. Landed cost came in at quoted per unit including retail packaging, leaving margin headroom inside the target retail price. The first production run of 3,000 units sold through in seven weeks, and repeat orders moved to a 6,000-unit release schedule.
How engagement usually starts, industry by industry
Most first contacts are short: a part list, a drawing, a target price or a competitor sample. The six answers below describe what we normally ask for and what the first order tends to look like.
Engagement normally starts with a part list and a sample, not a purchase order. Send the drawings, the approved-maker references and the quantities you use per year; we return a shortlist of factories, a price comparison and a note on which references carry obsolescence risk. A first order is usually 200 – 500 pcs per part, and a service-parts buffer is discussed at the same time.
Start with the target retail price, the destination markets and the shipping date. We work backwards from there to a specification, a compliance list and a landed cost, then send sample units from an existing platform. Most customers approve samples first, place a pilot run of 1,000 – 3,000 pcs, and scale to a container order once sell-through is confirmed.
Distributors and panel builders usually begin with a mixed enquiry: standard components plus one or two custom parts. We quote the standard lines from the catalogue and the custom parts separately, with enclosure and finishing options. Once the technical data is agreed, a frame order with monthly releases keeps installation sites supplied without holding the whole quantity at once.
Engagement starts with the vehicle application and the reference range, because testing follows the application. We confirm the material and grade first, quote tooling where a new die or mould is needed, and agree the inspection and PPAP level before production. Harness projects typically begin with a sample set built from your drawing for fitment approval.
Send the electrical specification, the dimming protocol and the destination markets. We reply with the certification route, an efficiency and burn-in test plan, and commercial terms at three volume steps. Because freight is a material share of landed cost on power products, the quotation usually includes a packing study so more units fit per container.
Start with the target retail price, the packaging concept and the launch date. We propose a platform close to your requirement, quote tooling and artwork separately, and produce a pilot run of 500 – 1,000 pcs for photography and channel testing. Repeat orders are released against forecast, with storage and pick-and-pack available from our Kwai Chung facility if you prefer not to hold stock.
Which industry are you buying for?
Send your part list, drawing or target specification together with the destination market. We reply with commercial terms, the compliance route and the shipping pattern that fits your demand.